Toyota Aygo: forme da SUV per la nuova generazione?

https%3A%2F%2Fmedia.autoblog.it%2F4%2F45c%2Faygo.jpg

Nel corso del 2021 debutterà la terza generazione della Toyota Aygo che, molto probabilmente, abbandonerà la carrozzeria da citycar per adottare le forme da SUV di piccole dimensioni. Inoltre, sarà progettata autonomamente da parte della Casa di Nagoya, perché il gruppo PSA non darà vita alle eredi delle gemelle Peugeot 108 e Citroen C1.

Sia lo sviluppo che il design sono stati affidati agli specifici reparti di Bruxelles, in Belgio, dato che la nuova Toyota Aygo sarà destinata soprattutto al mercato europeo. Infatti, nonostante l'abbandono del Segmento A da parte di molti costruttori automobilistici, Toyota non vuole rinunciare ai circa 100.000 esemplari venduti mediamente dalla citycar.


Toyota svela il primo teaser della nuova SUV piccola

Rilasciata la prima immagine della SUV piccola basata su una nuova variante della piattaforma GA-B


Tuttavia, dato che l'impianto ceco di Kolin ha la capacità produttiva annua di circa 300.000 unità, è molto probabile che la piccola SUV con la denominazione Toyota Aygo sarà proposta anche con i brand Daihatsu sul mercato giapponese e Scion sul mercato statunitense, senza dimenticare la nuova consociata Maruti per il mercato indiano.

Per quanto riguarda le motorizzazioni, la nuova generazione della Toyota Aygo continuerà ad essere proposta con il propulsore a benzina 1.0 VVT-i da 72 CV di potenza, anche se il costruttore nipponico punterà molto sulla versione a propulsione ibrida con l'unità 1.5 Hybrid da 101 CV di potenza. Infine, non è esclusa anche la declinazione EV a propulsione elettrica, destinata soprattutto al mercato cinese. La commercializzazione, invece, partirà circa un anno dopo la presentazione, ovvero nel corso del 2022.

Toyota Aygo: forme da SUV per la nuova generazione? pubblicato su Autoblog.it 13 febbraio 2020 09:00.

Leggi Tutto...
 
FULL AND QUALITATIVE DIAGNOSTICS OF ENGINE AND OTHER CAR SYSTEMS DO NOT BE ELM327 AT ALL WISHES OF THE OWNER ... DO NOT NEED TO FEED ILLUSIONS ... It’s important to use the ELM-327 engine somewhere, if you don’t have to go to the panel, “God forbid,” the machine will start to work "not normal" in order to at least understand what kind of repair to start preparing for ... independently decrypting the errors ...

Recently, in various kinds of automotive forums, there has been, to one degree or another, interest in diagnosing a car using the ELM-327 adapter. I decided to share information on connectivity, settings, etc.

This adapter allows you to view the following parameters:
• Engine turns;
• Coolant temperature;
• Short-term fuel correction;
• Long-term fuel correction;
• Pressure in the intake manifold;
• Oxygen sensor data;
• Engine turns;
• engine load;
• State of the fuel system;
• Vehicle speed;
• Absolute air pressure;
• Advance ignition;
• Intake air temperature;
• Mass air flow;
• Throttle position;
• Graphic display of the parameters of the above parameters;
Supported ELM327 adapter protocols:
• ISO15765-4 (CAN bus): Audi, Opel, VW, Ford, Jaguar, Renault, Peugeot, Chrysler, Porsche, Volvo, Saab, Mazda, Mitsubishi;
• ISO14230-4 (KWP2000): Daewoo, Hyundai, KIA;
• ISO9141-2: Honda, Infinity, Lexus, Nissan, Toyota, Audi, BMW, Mercedes, Porsche;
• J1850 VPW: Buick, Cadillac, Chevrolet, Chrysler, Dodge, GM, Isuzu;
• J1850 PWM: Ford, Lincoln, Mazda

Diagnostic software ELM-327 is full on torrents, Google Play, and indeed on the Internet.
For example, a good selection of Carzis diagnostic program.

ELM-327 connection settings:

ELM 327 Bluetooth Connection:
Attention! In order to avoid power surges that could damage the adapter and / or the car's computer, we recommend that you connect / disconnect the scanner only when the ignition is off.
1. Install any ELM 327 program on your device;
2. Connect the ELM327 Bluetooth to the ODB 2 diagnostic connector of your car;
3. Turn on the ignition or start the car;
4. Go to the settings of your Android device;
5. Go to the wireless settings;
6. Turn on Bluetooth and click "Bluetooth Settings";
7. Click "Search for devices";
8. Select the found Elm327 adapter with the name "OBD-II";
9. Enter the pairing code elm327: 1234
10. If the code approached, you will see the inscription "Paired, but not connected." This completes the setup. In very rare cases, the pairing code can be 0000 or 6789;
11. Run the previously installed program;
12. After starting the program, you will see that the only device on the main screen of the program is INACTIVE;
13. Press "Menu" and go to "Settings". In the settings, select "OBD2 adapter settings";
14. Click "Connection Type";
15. Select "Bluetooth";
16. Click "Select a Bluetooth device";
17. Select the device with which you paired in step 8. This completes the program setup. Return to the main screen of the program;
18. Take full advantage of the Elm327 adapter!

ELM 327 WI-FI connection (smartphones on IOS work only via WIFI):
Attention! In order to avoid power surges that could damage the adapter and / or the car's computer, we recommend that you connect / disconnect the scanner only when the ignition is off.
1. Install any ELM 327 program on your device;
2. Connect the ELM327 Wi-Fi car diagnostic adapter to the OBD II connector of the diagnosed vehicle;
3. Insert the key into the ignition switch and turn on the car ignition (can be wound up);
4. Go to the Wi-Fi wireless settings section of your phone / tablet / computer .;
5. Select a WiFiOBD network. Go to settings, on the tab "Static";
6. In this tab, enter the following data:
IP Address: 192.168.0.38
Subnet Mask: 255.255.255.0
Main Gateway: 192.168.0.10
Port: 35000
HTTP Proxy: Auto
7. Go to the program menu that you installed in the first paragraph on the phone / tablet to work with the adapter;
8. Pair the program with the vehicle ECU. Done!
 
Indietro
Alto